Baseus Energy Source Inflator Pump
2400mah Lithium battery / Automatic detection of tire pressure / Auto charge and stop / Multi-purpose
Lithium Battery Wireless Inflation
2400mAh Powerful lithium battery
Fully Charged Support More
Notes: Due to the limitation of cylinder number, it is recommended to pause for 5 minutes after using for 10 minutes. Otherwise the rising temperature of the metal shell will damage the motor.
Tire Pressure Status Automatic Display
An intelligent sensor chip is built in the air nozzleso the tire pressure is automatically detected anddisplayed once connect
Intelligent Digital Display Standard Preset
Manual Adiustment Dual-mode Tire Pressure Setting
As it will automatically stop inflation when it reaches the value of healthy tire pressure.
Short press to turn on the device and switch the mode. Long press for 3 seconds until the unit flashes,then short press to toggle between unit presets while flashing.
Adjusts preset air pressure value and preset display changes. Short press to increase or decrease.
Press and hold for 3 seconds to turn off the machine when it is turned on
Short press once to turn on the light, then short press once for strobe light, then short press once to SOS flashing light
Full Metal Pressurized Cylinder
Strong Power and Stable Operation
Upgraded Noise Reduction
Effectively Reduce Noise by 20%
Double-sided Heat Dissipation
The air pump is equipped with 274 small air outlets on both sides, ensure the stable operation of the motor
It is convenient to charge at night and can send out an S0S in case of an accident
Applicable to More Equipment
Adapt More Equipment
-01-Install the corresponding air nozzle according to the inflation equipment
-02-Press the M key to adjust to the device to be charged
-03-Connect the air nozzle, press the OK button lightly to start inflation
-04-Stop when top up and pull out the air nozzle to stop inflation
Name: Baseus Energy Source Inflator Pump
Input voltage: 5V/2.4A
Battery capacity: 2400mah
Rated energy: 25. 9wh
Charging time: about 4-5h
Pressure gauge range:
5-120psi effective working range:
5-150psl effective detection range;
Exceeding 150psi may damage the sensor.